« previous next »
Pages: [1]   Go Down

Author Topic: Polishing a rolex  (Read 1685 times)

Offline hiro

  • Freshie
  • *
  • Posts: 26
Polishing a rolex
« on: June 18, 2020, 04:26:26 PM »
Dear forumer, i had my hulk dropped on coarse cement floor and to my unfortunate the case got some scratched. Where can i get it polished? RSC only? Or anybody can recommend me a good and trusted shop that can get the job done?

Thanks in advance.
Logged

Offline bane

  • Newbie
  • *
  • Posts: 8
Re: Polishing a rolex
« Reply #1 on: June 18, 2020, 08:25:30 PM »
Ouch. But in my humble opinion, don’t polish. The steel will become thinner and the shape will not be the same. Scratches are badge of honour.


Sent from my iPhone using Tapatalk
Logged

Offline Cocas

  • Hero Member
  • *****
  • Posts: 2798
Re: Polishing a rolex
« Reply #2 on: June 19, 2020, 06:54:03 AM »
Quote from: hiro on June 18, 2020, 04:26:26 PM
Dear forumer, i had my hulk dropped on coarse cement floor and to my unfortunate the case got some scratched. Where can i get it polished? RSC only? Or anybody can recommend me a good and trusted shop that can get the job done?

Thanks in advance.
if you can show how bad the scratch is, that would be easier for us to advice.

Normally for me, if the scratch mark is too deep and like a dent, I will leave them. I will polish it off if the scratch is minor.
Logged

Offline FourRings

  • Newbie
  • *
  • Posts: 12
Re: Polishing a rolex
« Reply #3 on: November 21, 2020, 08:11:58 PM »
A very nice grey dealer told me, dont polish your watch. Agree with the above comment. Because he said there might be some markings on the watch that we dont know if you polish it, it will remove the markings.
Logged

Offline IamJacky

  • Freshie
  • *
  • Posts: 32
Re: Polishing a rolex
« Reply #4 on: December 07, 2020, 02:25:40 PM »
I've always heard that polishing my Rolex will decrease its value, though I don't really plan on selling my watches. I believe this rule only applies to the highly sought after vintage GMT/Daytona/Subs. For my modern Rolex, I don't really mind polishing it.

My first Rolex is a Datejust II, and I wore the hell out of that watch for 8-9 years almost daily. A couple months ago I finally decided to send it in to RSC and I could not be happier with the result. Having it back was almost like the day I first bought it.



Logged

Offline jack88x

  • Newbie
  • *
  • Posts: 12
Re: Polishing a rolex
« Reply #5 on: December 09, 2020, 08:01:43 PM »
may i know how much does RSC billed you for polishing?
Logged

Offline IamJacky

  • Freshie
  • *
  • Posts: 32
Re: Polishing a rolex
« Reply #6 on: December 09, 2020, 08:21:03 PM »
Quote from: jack88x on December 09, 2020, 08:01:43 PM
may i know how much does RSC billed you for polishing?

They quoted me more than that, had to replace certain parts. But for a complete overhaul/service/polish was about RM2,500
Logged

Offline jack88x

  • Newbie
  • *
  • Posts: 12
Re: Polishing a rolex
« Reply #7 on: December 10, 2020, 12:02:59 PM »
noted with thanks

1 more question...how long it takes roughly for the entire process?
Logged

Offline IamJacky

  • Freshie
  • *
  • Posts: 32
Re: Polishing a rolex
« Reply #8 on: December 10, 2020, 12:13:14 PM »
Quote from: jack88x on December 10, 2020, 12:02:59 PM
noted with thanks

1 more question...how long it takes roughly for the entire process?

RSC Kuala Lumpur quoted me 2 months but the actual time was 1.5 months for me.
Logged

Offline SeanLo

  • Newbie
  • *
  • Posts: 1
Re: Polishing a rolex
« Reply #9 on: December 13, 2020, 10:13:46 PM »
good to know posting
Logged

Offline mnazri.tan

  • Hero Member
  • *****
  • Posts: 824
  • Time As It Is
    • Time As It Is.....
Re: Polishing a rolex
« Reply #10 on: January 07, 2021, 05:47:26 AM »
Wow that look like brand new . Should send my panerai as well


Sent from my iPhone using Tapatalk
Logged
Pages: [1]   Go Up
« previous next »