Ming 17.03 LE Blue
Case material: Grade 2 Titanium is light weight but non-glossy. Because of it's not heavy like stainless steel, the whole watch will not stick to your wrist and your sweat can dry up faster and you will not feel sticky.
Thickness & water resistance: it's amazingly for a GMT watch thickness is less than 10mm. Some more it got 100m water resistant. There are many watch brands could not achieve this.
Lume: the hands lume are Superluminova X1 grade, the dounut ring hours marker & ring are Superluminova C3 grade. The X1 could apply to hours marker because X1 cannot apply onto sapphire surface. X1 looks dimmed as compared against C3 during initial lume but the lume brightness will stabilize and look the same after about 2 minutes.
Crown: the crown is not a screw down crow. Its edge is sharp. Not sure is it because of grade 2 Ti is used. It's easy for turning the crown but certainly not comfortable for lady tender skin .
Dial: it got 3-parts sapphire dial. The centered dial part sunk lower than the outer dial. The hour hand is sitting within the centered dial surface. The special design allows the reduction in thickness.
The sapphire material is used and the blue color is amazing. So far the watery reflection with the hands "floating" on the blue dial effect. Other than Ming watch, I only can find it in Rolex Cellini 4016 watch. So far to my knowledge, there is no other watch brand makes watery dial like that.
To be continued....